SwitchSniffer 1.3.0

  Сообщить об ошибке         Сообщить о новой версии         Дополнить описание

Описание программы SwitchSniffer

SwitchSniffer is a program that can scan your switched LAN for up hosts and can reroute and collect all packets without the target users' recognition. It can also detect the program running on the network and block user definable sessions like firewall.
SwitchSniffer is a software that detects and blocks LAN programs.
If you use this program in tandem with any sniffer program, you can capture and see the users’ IDs and passwords on a switched network.

· Ключевые особенности и характеристики SwitchSniffer 1.3.0

· It can pull and collect all the packets on the LAN.
· It can scan and show the active hosts on the LAN within a very short time.
· While spoofing ARP tables, it can act as another gateway (or ip-forwarder) without other users' recognition on the LAN.
· It can collect and forward packets by selecting inbound, outbound, and both to be sent to the Internet.
· An ARP table is recovered automatically in a little time (about 30 seconds). But, this program can keep spoofing continuously with a periodic time.
· Although one or more network interface cards are installed on a computer, this program can scan and spoof by selecting one of NICs.
· It can get traffic information about the amount of data transferred to and from the internet including I session information.
· It can detect which computer is running an arpspoofer program on the local network.
· It can scan all hosts automatically on the network.
· It has a feature which filters or blocks sessions, local hosts and remote hosts.
· No more installation of winpcap driver.

· Ограничения SwitchSniffer 1.3.0

· Специальные требования SwitchSniffer 1.3.0

· История версий и изменений SwitchSniffer

· Описание и дополнения от редакторов и пользователей сайта

Связанные статьи, обзоры и новости